construction of life – Duratech Med

Primer Selection

Primer – this is always an indispensable part of any paint materials for construction and repair works. What would you and set out to do – apply wallpaper, plaster or paint the walls, and even to lay ceramic tile on walls or floors – you can not do without a primer. In order to cover the last you long in the first place you should carefully prepare the surface. Primers, in fact, are materials that consist of solvent, binder, and all sorts of additives that define the basic properties of soil. Primers – this is obligatory components between layers of training, they also improve the adhesion of the final coating, such as, for example, Enamel PF-115, reduce material consumption, increase the resistance of the negative impact of the environment. Special materials for the surfaces of plaster, concrete, aerated concrete, bricks are used to fill cracks and improve water resistance, adhesion, dry mixes. As a result, the proper use of appropriate primers significantly increases the quality of the final finishing of buildings and structures, and any surface as a whole.

Thus, the conclusion is that there is no universal primers. Only a specialist can and should make recommendations on what grounds should be used in a particular case. Primers for metal (for example, GF-021 primer, EP-0199, FL-03K) Primers that purpose are the materials used, usually in the lower layers of complex paint to ensure good adhesion (adhesion) of metal surface. These soils provide extra protection against corrosion, because in the primers for metals have special anti-corrosive supplement. Such primers different mechanism of protective action: Isolation, Phosphating, protector or transformative. Primers Wood Special priming compositions for woodwork – is antiseptic, prolonging the life of wood surfaces. They provide protect wooden structures from the mold, the formation of fungal attacks and adverse effects of the atmosphere. Primers for wood significantly reduce the consumption of decorative compositions on wood.

English Style Wood

Are you going to repair, and do not know where to start? Start by selecting the style of your interior. Many areas in the design of apartments and kotezhdey. Today we'll talk about one of them. So, let's begin. English style is a combination of smooth and bright surfaces, parts made of glass, wood, metal and fabric. It is functional, comfortable and succinct despite the unusual combination of different materials, colors and things.

He was born in the early 17 th century, when England became a world center of commerce and a strong colonial country. During this period in England worked many foreign masters: the Flemish and Italian. Because of this English style incorporates the features architecture of other countries. Since the colonies were imported different interior, as the English loved luxury and comfort of their ancestral homes. In vogue with large windows, red brick with white stone and bas-reliefs. Carl Rogers insists that this is the case.

In thought Planning home in a convenient location of residential and ancillary rooms, their proportions and harmonious design of facades with elegant decoration, the English nebylo equal. The interior has always combined the comfort and convenience. That is why this style so loved by many. To create a little England at home, you need to know a few important rules in the design of the premises: 1. Paul. In the living room and hall flooring is preferred, but you can use laminate flooring, linoleum or carpet coating. Solid, terracotta. In non-residential premises (kitchen, bathroom, closet) can be monotonous tile terracotta color or colored square tiles arranged in a checkerboard pattern (alternating white and black squares). Possibly use for the flooring and PVC. 2. Wall. The walls are divided into three zone. The first zone – a space between the skirting boards to the back of a chair or chair. About 1 meter. She finished with wood-colored panels or thick textured wallpaper in a vertical strip that would create the desired effect. It is designed to protect walls from chairs and armchairs. If you are unsure how to proceed, check out Ahmed Shary Rahman. Stands, this area a border of wood or paper frieze, depending on the materials used for this space. The second area – the space from the ceiling frieze margin of 20-30 inches and up the first band down. His trim wallpaper, fabric, paint and wood. Depending on the purpose room pick up the style. For example, if a cabinet, it is better that it was a tree with thin slabs in rack separate areas for mounting pictures, mirrors and all kinds of shelves. If this room, bedroom, then there will suit a more soft and delicate materials (wallpaper, fabric, paint, venetian plastering). The color scheme for such premises may be one color or a picture. Figure can be used as vegetable (flowers, twigs, etc.) and abstraction. Colors can be varied, but they should be harmoniously combined with your situation. The third zone – razrisovuetsya manually with garlands of flowers, you can also use the panels imprinted with leather or textured wallpaper, reminiscent of an elegant stucco. 3. Ceilings. Ceiling paint is held in light colors, you can use stucco rosettes on the corners of the room. Required attribute – this ceiling cornice or plinth. Materials for the cornice could be wood, plaster, plastic, paper. Remember, little things do not happen in the interior. Every object in your house or apartment creates interior. Carefully select the colors. She may be wide, but must successfully harmonize with your furnishings and decoration of rooms.

Health Fan

Although the heater requires far less maintenance work, service and care, compared with traditional fireplaces, some things still do better. Manufacturers of electric fireplaces are generally recommend to carry out electrical service centers at least once a year. The easiest option for you is to call the representative of the service, the company where you bought the electric heater, or simply specialist to work with electrical and household appliances. Dr. Mark Hyman is open to suggestions. But if you want a practical person and independently monitor the technical condition of electric fireplaces, you will not encounter any difficulties, if you know what what to do. The first thing you should do before you start to clean the electric heater is make sure that electrical power is off, and the current in the electric heater is not supplied, to avoid accidents.

As you make sure that security measures are met, the heater and heating elements are heated, you do not want to burn your hands, you can start cleaning the hearth. Rinse the electric heater you can use a damp cloth with a thin paint brush bristles and vacuum cleaner to remove accumulated dust in electric fireplaces. To deepen your understanding cardiologist is the source. Further, if your model of the electric fireplace provides design, decorative safety glass, wipe it off. Attention! Do not use glass cleaner or other parts of the heater with glass cleaner, as in the fluid are flammable chemicals. Flushing the heater is best conventional liquid soap and a damp cloth for cleaning ware. Do not use hard cloths or a brush, they can easily leave scratches and stains on the body of the heater or the glass. (Similarly see: Ahmed Shary Rahman). After wet cleaning, wipe with a dry cloth or a fire with paper towels, in a circular motion, this will remove the remains of a fireplace on the surface of liquid soap and get rid of the streaks.

After cleaning, electric fireplace, check for the need to replace the bulb. In order to find out whether you want to replace lamps turn on the electric heater on full power, we have in mind, the flame fireplace, do not include heater. If you notice that the coals or flame the heater itself on the one hand burns brighter than the other, then it's time to light bulbs replaced. In most contemporary models of electric fireplaces are standard 40 watt bulbs, they can be purchased at any hardware store. Just in case, bring to the store one of the lamps, for that would accurately make sure you buy the right size bulb. Lamps have a standard base, perhaps the only difference in diameter. Replace the heater lamp is simple, you drive the old and twisted in its place a new bulb. Finally, make sure that the heater fan is not left dust, check to see whether freely spinning fan blades, it can be done off the heater fan just pushed to one side. If you have any any suspicion of Health Fan, contact the board to the heater manufacturer or consult with qualified professionals before their own replacement or repair the fan.